Influence of Conditions for Obtaining Polylactide-Based Materials on Their Physico-Mechanical and Rheological Characteristics

封面

如何引用文章

全文:

开放存取 开放存取
受限制的访问 ##reader.subscriptionAccessGranted##
受限制的访问 订阅存取

详细

The work is devoted to the study of the influence of the conditions for obtaining materials based on the synthetic polymer polylactide on their physico-mechanical and rheological characteristics. These materials are promising for the creation of biodegradable polymer implants of temporary action to maintain the mechanical properties of broken bones during the healing period. They are designed to replace the titanium fixators currently used for these purposes, which is due not only to the need for repeated surgery to extract them, but also to the fact that the strength and modulus of elasticity of titanium fixators exceed the values of bone strength indicators by an order of magnitude, which can cause the phenomenon of bone resorption and a decrease in its strength. It has been established that with an increase in temperature in the plasticization and pressing zone, as well as with an increase in pressure in the press, there is a natural decrease in the viscosity of the polylactide melt, as well as the values of the elastic modulus and breaking stress of solid samples. Varying the cooling rate of the material during the pressing process affects the degree of its crystallinity. At the same time, the lower the cooling rate, the greater the degree of crystallinity of the polylactide and the greater the values of the elastic modulus and breaking stress.

全文:

受限制的访问

作者简介

E. Bakirova

Ufa University of Science and Technology

编辑信件的主要联系方式.
Email: elina_bakirova@mail.ru
俄罗斯联邦, Ufa

R. Lazdin

Ufa University of Science and Technology

Email: elina_bakirova@mail.ru
俄罗斯联邦, Ufa

A. Shurshina

Ufa University of Science and Technology

Email: elina_bakirova@mail.ru
俄罗斯联邦, Ufa

V. Chernova

Ufa University of Science and Technology

Email: elina_bakirova@mail.ru
俄罗斯联邦, Ufa

E. Zakharova

Ufa University of Science and Technology

Email: elina_bakirova@mail.ru
俄罗斯联邦, Ufa

E. Kulish

Ufa University of Science and Technology

Email: elina_bakirova@mail.ru
俄罗斯联邦, Ufa

参考

  1. Wang Q., Zhou P., Liu S. et al. // Nanomaterials. 2020. V. 10. P. 1244.
  2. Nicholson W. J. // Prosthesis. 2020. V. 2. P. 100.
  3. Black J. Biological Performance of Materials: Fundamentals of Biocompatibility. N.W.: CSC Press, 1992.
  4. Hench L.L., Jones J.R. Biomaterials, artificial organs and tissue engineering. Boca Raton: CRC Press, 2005.
  5. Wong J.Y., Bronzino J.D. Biomaterials. Boca Raton: CRC Press, 2007.
  6. Shtilman M.I. Polymers for medical and biological purposes. M.: ICC “Academic book”, 2006.
  7. Kirilova I.A., Podorozhnaya V.T., Legostaeva E.V. et al. // Spinal surgery. 2010. No. 1. P. 81.
  8. Volova T.G. // Journal Siberian Federal University. Biology series. 2014. V. 7. No. 2. P. 103.
  9. Boyandin A.N., Nikolaeva E.D., Shabanov A.V. et al. // Journal Siberian Federal University. Biology series. 2014. V. 7. No. 2. P. 174.
  10. Misra S., Ansari T., Valappil S. // Biomaterials. 2010. № 31. C. 2806.
  11. Park H., Temenoff J.S., Mikos A.G. // Engineering of Functional Skeletal Tissues. 2007. V. 3. Р. 55.
  12. Shibryaeva L.S., Krasheninnikov V.G., Gorsheneva V.N. // High-molecular compounds. A. 2019. V. 61. No. 2. P. 139.
  13. Rogovina S.Z. // High-molecular compounds. C. 2016. V. 58. No. 1. P. 68.
  14. Averyanov I.V., Korzhikov V.A., Tennikova T.B. // High-molecular compounds. B. 2015. V. 57. No. 4. P. 281.
  15. Korzhikov V.A., Vlakh E.G., Tennikova T.B. // High-molecular compounds. Series A. 2012. V. 54. No. 8. P. 1203.
  16. Rogovina S.Z., Aleksanyan K.V., Vladimirov L.V. et al. // Russ. J. Phys. Chem. B. 2019. V. 13. No. 5. P. 812.
  17. Fujihara Y., Hikita A., Takato T. et al. // Physiol. 2018. V. 233. P. 1490.
  18. MacDonald Rt., McCarthy S.P., Gross R.A. // Macromolecules. 1996. № 29. Р. 7356.
  19. Dhillon M., Lokesh A. // Indian J. Orthop. 2006. № 40 (4). Р. 205.
  20. Burkhart S.S. // Biomaterials. 2000. № 21(24). Р. 2631.
  21. Kristensen G., Lind T., Lavard P. et al. // Arthrosc. J. Arthrosc. Relat. Surg. 1990. № 6 (3). Р. 242.
  22. Macarini L., Murrone M., Marini S. et al. // Radiol. Med. 2004. № 107(1-2). Р. 47.
  23. McFarland E.G., Park H.B., Keyurapan E. et al. // Am. J. Sports Med. 2005. № 33 (12). Р. 1918.
  24. Krul L.P., Belov D.A., Butovskaya G.V. // Bulletin of the Belarusian State University. Chemistry. 2011. No. 3. P. 5.
  25. Zhang J., Duan Y., Sato H. // Macromolecules. 2005. V. 38. № 19. P. 8012.
  26. Nakayama N., Hayashi T. // Polym. Degrad. Stab. 2007. V. 92. P. 1255.
  27. Tertyshnaya Yu.V., Podzorova M.V. // Russ. J. Phys. Chem. B. 2020. V. 14. No. 1. P. 167.
  28. Zhang J., Tsuji H., Noda I. et al. // Macromolecules. 2004. V. 37. № 17. P. 6433.
  29. Lim L.-T., Auras R., Rubino M. // Prog. Polym. Sci. 2008. V. 33, № 8. P. 820.
  30. Fischer E.W., Sterzel H.J., Wegner G. // Colloid and Polymer Science. 1973. № 251. P. 980.
  31. Schramm G.A. Practical Approach to Rheology and Rheometry 2nd Edition. Karlsruhe: Thermo Electron GmbH, 2000.
  32. Bakirova E.R., Lazdin R.Yu., Chernova V.V. et al. // Butlerov messages. 2022. V. 70. No. 4. P. 59.
  33. Bakirova E.R., Lazdin R.Yu., Chernova V.V. et al. // Fundamental and applied problems of obtaining new materials: research, innovation and technology. Astrakhan: Federal State Budgetary Educational Institution of Higher Professional Education “AstSU”, 2022. P. 3.

补充文件

附件文件
动作
1. JATS XML
下载
2. Fig. 1. Thermograms of PLA-1 (1, 3) and PLA-2 (2, 4, 5) samples. Curves 1, 2 refer to the original samples, curves 3-5 - to the samples obtained at temperatures in the plasticization/compression zone 190С/190С and pressure in the press of 10 000 kgf. The rate of temperature cooling in the press was 60 (3, 4) and 15С/min (5).

下载 (113KB)
索引源数据
3. Fig. 2. Dependence of the elastic modulus of PLA-1 (a) and PLA-2 (b) samples on the value of pressure in the press for samples obtained with the cooling rate after pressing 10 (1), 15 (2) and 60С/min (3).

下载 (78KB)
索引源数据
4. Fig. 3. Dependence of tensile stress of PLA-1 (a) and PLA-2 (b) specimens on the value of pressure in the press for specimens obtained with cooling rate after pressing 10 (1), 15 (2) and 60С/min (3).

下载 (71KB)
索引源数据
5. Fig. 4. Dependence of breaking elongation of PLA-1 (a) and PLA-2 (b) specimens on the value of pressure in the press for specimens obtained with the cooling rate after pressing 10 (1), 15 (2) and 60С/min (3).

下载 (63KB)
索引源数据

版权所有 © Russian Academy of Sciences, 2024