Influence of an Ultralow Graphene Content on the Physical
and Mechanical Characteristics of Uhmwpe-Based Composites

A. S. Zabolotnov; Заболотнов А. С.; S. S. Gostev; Гостев С. С.; I. A. Maklakova; Маклакова И. А.; L. A. Novokshonova; Новокшонова Л. А.; V. G. Krasheninnikov; Крашенинников В. Г.; M. V. Gudkov; Гудков М. В.

doi:10.31857/S0207401X23120142

Influence of an Ultralow Graphene Content on the Physical and Mechanical Characteristics of Uhmwpe-Based Composites

Authors: Zabolotnov A.S.¹, Gostev S.S.¹, Maklakova I.A.¹, Novokshonova L.A.¹, Krasheninnikov V.G.¹, Gudkov M.V.¹
Affiliations:
1. Semenov Federal Research Center for Chemical Physics, Russian Academy of Sciences
Issue: Vol 42, No 12 (2023)
Pages: 81-85
Section: СТРОЕНИЕ ХИМИЧЕСКИХ СОЕДИНЕНИЙ, РЕАКЦИОННАЯ СПОСОБНОСТЬ
URL: https://vestnikugrasu.org/0207-401X/article/view/675016
DOI: https://doi.org/10.31857/S0207401X23120142
EDN: https://elibrary.ru/QKZLCE
ID: 675016

Cite item

Full Text

Open Access
Restricted Access

Access granted
Restricted Access

Subscription Access

Abstract
About the authors
References
Supplementary files
Statistics

Abstract

The polymerization filling method is used to obtain nanocomposites based on ultrahigh molecular
weight polyethylene (UHMWPE) and graphene at with an ultralow content of 0.0065–0.019 vol %. The
melting points and degrees of crystallinity of the obtained composites are close to the corresponding characteristics
of unfilled UHMWPE. The strain-strength properties under the tension of the samples of the
obtained composites are studied depending on the content of graphene. It is shown that the tensile strength
of the composites increases significantly with an increase in the graphene content to 0.012 vol % compared
to unfilled UHMWPE with a subsequent decrease. The relative elongation changes in a similar way.

Keywords

ultrahigh molecular weight polyethylene, graphene, composites, polymerization filling method, physical and mechanical properties

References

Steven M.K. UHMWPE Biomaterials Handbook, 2nd edn. B.: Academic Press, 2009.
Majid Md., Khan M.S., Dr. Moeed K.M., Fatima Z. // Intern. J. Eng. Trends and Appl. 2016. V. 3. P. 26.
Wen J., Yin P., Zhen M. // Mater. Lett. 2008. V. 62. № 25. P. 4161; https://doi.org/10.1016/j.matlet.2008.06.003
Гоголева О.В., Петрова П.Н., Попов С.Н., Охлопкова А.А. // Трение и износ. 2015. Т. 36. № 4. С. 394; https://doi.org/10.3103/S1068366615040054
Панин C.В., Панин В.Е., Корниенко Л.А. и др. // Химия и хим. технол. 2011. Т. 54. № 7. С. 102.
Селютин Г.Е., Гаврилов Ю.Ю., Воскресенская Е.Н. и др. // Химия в интересах устойч. развит. 2010. Т. 18. № 3. С. 375.
Новокшонова Л.А., Мешкова И.Н. // Высокомолекуляр. соединения. 1994. Т. 36. № 4. С. 629.
Бревнов П.Н., Кирсанкина Г.Р., Заболотнов А.С. и др. // Высокомолекуляр. соединения. С. 2016. Т. 58. № 1. С. 42; https://doi.org/10.7868/S2308114716010027
Chmutin I., Novokshonova L., Brevnov P., Yukhayeva G., Ryvkina N. // Polyolef. J. 2017. V. 4. № 1. P. 1; https://doi.org/10.22063/POJ.2016.1384
Заболотнов А.С., Бревнов П.Н., Акульшин В.В. и др. // Все материалы. Энциклопед. справ. 2017. № 12. С. 13.
Xiong D.S., Lin J.M., Fan D.L. // Biomed. Mater. 2006. V. 1. P. 175.
Xiong D., Lin J., Fan D., Jin Z. // J. Mater. Sci. 2007. V. 18. P. 2131.
Kudinova O.I., Nezhnyi P.A., Grinev V.G. et al. // J. Phys. Chem. B. 2022. V. 16. № 4. P. 764; https://doi.org/10.1134/S199079312204025
Бревнов П.Н., Заболотнов А.С., Крашенинников В.Г. и др. // Кинетика и катализ. 2016. Т. 57. № 4. С. 484; https://doi.org/10.7868/S0453881116030011
Zhang H., Moon Y.K., Zhang X.Q. et al. // Eur. Polym. J. 2017. V. 87. P. 60; https://doi.org/10.1016/j.eurpolymj.2016.12.010
Wannasri S., Panin S.V., Ivanova L.R., Kornienko L.A., Piriyayon S. // Proced. Eng. 2009. V. 1. P. 67; https://doi.org/10.1016/j.proeng.2009.06.018
Ren X., Wang X.Q., Sui G. et al. // J. Appl. Polym. Sci. 2008. V. 107. № 5. P. 2837; https://doi.org/10.1002/app.27354
Wood W.J., Maguire R.G., Zhong W.H. // Composites Part B. 2011. V. 42. № 3. P. 584; https://doi.org/10.1016/j.compositesb.2010.09.006
Puertolas J.A., Martinez-Nogues V., Martinez-Morlanes M.J. et al. // Wear. 2010. V. 269. № 5–6. P. 458; https://doi.org/10.1016/j.wear.2010.04.033
Polschikov S.V., Nedorezova P.M., Palaznik O.M. et al. // Polym. Eng. Sci. 2018. V. 58. № 9. P. 1461; https://doi.org/10.1002/pen.24644
Samad M.A., Sinha S.K. // Tribol. Intern. 2011. V. 44. № 12. P. 1932; https://doi.org/10.1016/j.triboint.2011.08.001
Hyunwoo K., Abdala A.A., Christopher W.M. // Macromol. 2010. V. 43. № 16. P. 6515; https://doi.org/10.1021/ma100572e
Lee C., Wei X., Kysar J.W., Hone J. // Science. 2008. V. 321. P. 385; https://doi.org/10.1126/science.1157996
Ansón-Casaos A., Puértolas J.A. // Tribol. Intern. 2017. V. 116. P. 1; https://doi.org/10.1016/j.triboint.2017.06.039
Jing T., Yihui W., Weimin C., Jiayuan Y., Ping X. // Polym. Test. 2021. V. 99. P. 1; https://doi.org/10.1016/j.polymertesting.2021.107217
Ушакова Т.М., Старчак Е.Е., Гостев С.С. и др. // Хим. физика. 2020. Т. 39. № 5. С. 66; https://doi.org/10.31857/S0207401X2005012X
Гоголева О.В., Петрова П.Н., Попов С.Н., Охлопкова А.А. // Трение и износ. 2015. Т. 36. № 4. С. 394.
Chih A., Anson-Casaos A., Puertolas J.A. // Tribol Intern. 2017. V. 116. P. 295; https://doi.org/10.1016/j.triboint.2017.07.027
Tai Z., Chen Y., An Y., Yan X., Xue Q. // Ibid. 2012. V. 46. P. 55; https://doi.org/10.1007/s11249-012-9919-6
Lahiri D., Hec F., Thiesse M. et al. // Ibid. 2014. V. 70. P. 165; https://doi.org/10.1016/j.triboint.2013.10.012
Ozerin A.N., Kechek’yan A.S., Golubev E.K. et al. // Nanotech. in Russia. 2015. V. 10. № 1–2. P. 42; https://doi.org/10.1134/S1995078015010115
Shiyanova K.A, Gudkov M.V., Gorenberg A.Y. et al. // ACS Omega. 2020. № 5. V. 39. P. 25148; https://doi.org/10.1021/acsomega.0c02859
Pei S., Cheng H.M. // Carbon. 2012. V. 50. № 9. P. 3210; https://doi.org/10.1016/j.carbon.2011.11.010
Аладышев А.М., Клямкина А.Н., Недорезова П.М., Киселева Е.В. // Хим. физика. 2020. Т. 39. № 7. С. 56; https://doi.org/10.31857/S0207401X2007002X
Перова А.Н., Бревнов П.Н., Усачев С.В. и др. // Хим. физика. 2021. Т. 40. № 7. С. 49; https://doi.org/10.31857/S0207401X21070074